How to Tell if Washer Suspension Rods Are Bad?

By admin | House

Sep 17
How to Tell if Washer Suspension Rods Are Bad?

Your washing machine consists of many complex components that are crucial for its functioning. The suspension rods are probably among the most important ones of these components. It helps the washer’s tub to stay in balance while it spins. That way, it prevents the appliance from shaking or vibrating too much.

So, among other performance issues, damaged suspension rods can make your washer significantly louder. You’d want to get rid of this issue without unnecessary delay whenever it shows up. But, for that, you need to make sure whether your washer has damaged suspension rods.

Here, we’ve mentioned some steps and DIY hacks to help you identify this issue. We have also shared and listed simple methods to fix the issue all by yourself. 

How to Tell if Washer Suspension Rods Are Bad1

How to Tell if Washer Suspension Rods Are Bad?

Your washing machine will usually vibrate or shake too much if it has faulty suspension rods. But, this sign often indicates an issue with specific other components as well. So, you need to make sure whether the problem indeed lies with the suspension rods. Now, that might be a complex and time-consuming task in many cases. Thus, you should hire a reliable washing machine repair Dubai if you’re in a hurry.

Want to check for damaged suspension rods all by yourself? Then, you must take the following steps to proceed without any error:

1.   Balance or Reduce the Load

As mentioned before, excessive vibrating doesn’t always indicate damaged suspension rods in your washer. Sometimes, the appliance might face this issue simply because you’ve loaded too many clothes into it. So, you must reduce your washer’s workload and see if that fixes the problem.

You can also try to simply position the clothes in a balanced way inside the tub. This does the trick in ending the excessive vibrations quite often. But, what if it doesn’t work in your case? Then, you have some more steps to try out.

2.   Check Whether the Feet are Leveled Properly

You might need to access the inner components of your washer. Before that, you might want to check your washer’s feet. After all, excessive vibrations might be caused when the feet are leveled inaccurately. If you find that to be the root cause, then you simply need to level the feet.

Once you’re done, check whether the appliance still vibrates unusually. In case it does, then you’d have to move towards more complex fixes. And, for that, you have to remove the panels of your washer.

3.   Check Whether the Rotor Mounting Nut is Secured Tightly

If you didn’t find the issues mentioned above, you must check the rotor mounting nut. And, for that, depending on the model, you might have to place the washer on its side. Then, remove the panels to locate the stator assembly. You might have to consult the instruction manual for this task. Also, you must always turn off the appliance while proceeding with this step.

Make sure the nut featured in this component is tight enough. If it isn’t, you need to tighten it and check whether the excessive vibration persists. In case this doesn’t fix the issue, you must take a look at the suspension rods.

4.   Check the Suspension Rods for Any Faults

Does the problem persist after you complete the previous steps? Then, you can almost be sure that your washer has faulty suspension rods. To be sure, you need to access the suspension rods by removing the panel. Then, check them thoroughly for any signs of faults or damages.

What if you find defects in your washing machine’s suspension rods? In that case, you might want to replace them as soon as possible. 

How to Replace Your Washer’s Suspension Rods?

PartSelect – How to Replace the Suspension Rod

Inserting new suspension rods in your washing machine isn’t as complicated as you might think. You don’t necessarily need any professional skills and experience to perform this task. Moreover, a screwdriver is pretty much all you need for doing this. Apart from that, you need to buy new suspension rods for the appliance, of course.

So, gather the supplies you’d need for this task and proceed with the following steps:

1.   Preparing the Washer for the Process

Is your washing machine connected to the power source? In that case, you must unplug it to prevent any accidents. Apart from that, you need to make some space to work on your washing machine. Is the appliance positioned near a wall? If yes, then move it to make enough room as per your requirements. Once you’re done, you can proceed to access the internal parts of the appliance.

2.   Remove the Front Panel

After you’ve taken the precautionary measures, you need to remove the washer’s front panel first. You must be wondering where it’s located? In that case, you can simply consult the service manual to find out that information. Usually, the front panel is located at the bottom front area in most washing machines.

So, you might need to prop it up for accessing the screws conveniently. Find a strong object for that and also make sure to secure the washer from falling. As an alternative, you can simply place your washer on its sides. You might need to take someone’s help to do that.

Once you’re ready, use a screwdriver to loosen and remove the screws. Then, gently remove the panel from the appliance and set it aside. After that, you need to remove the top panel as well.

3.   Remove the Top Panel

The screws of the top panel are usually located right under the lid. In some models, you’ll find them at the cabinet’s corners. If you can’t find them, simply consult the appliance’s service manual. Remove these screws and gently detach the panel as in the previous step.

Once you remove both the panels, you can access the suspension rods of the appliance. So, you can now proceed to remove them from your washer right away.

4.   Remove the Suspension Rods

To remove the faulty suspension rods, you need to take the bearing and bearing cups off them. And, for that, you need to lift the rods. After that, you also need to unhook them and leave them hanging on the rear frame. Then, you can remove the bearing cups from the washer safely.

How to Tell if Washer Suspension Rods Are Bad

Once you’re done, you can pull out all the suspension rods from inside the washer. Now, you must prepare your new suspension rods for inserting them into the appliance.

5.   Insert the New Suspension Rods

After removing the faulty rods, you can insert the new ones through the top panel opening. Then, hold them until you put the bearing cups back in their place. You can then let go of the rods to leave them hanging from the cups. After that, you must assemble the components as they were.

After inserting the new rods, you can screw the panels back into the washing machine. Then, connect it to power and make sure the issue is fixed.

Hire a Professional Technician

The methods mentioned above should help you effectively detect and replace faulty suspension rods in your washer. However, you might not feel confident about performing these tasks yourself. After all, it might seriously affect your appliance if anything goes wrong. So, you must hire a technician to deal with the issue in these cases.

Also Recommended: Tips to Find the Best Options for Washing Machine Repair in Dubai.